Related Manuals for Könner & Söhnen KS 15TKG 52/35
Summary of Contents for Könner & Söhnen KS 15TKG 52/35
- Page 1 Owner’s Manual Please, read this manual carefully before use! Kinetic log splitter 15 ton KS 15TKG 52/35...
-
Page 2: Safety Information
INTRODUCTION Thank you for your purchase of Könner & Söhnen products. This manual contains a brief description of safety, use and debugging. More information can be found on the official manufacturer’s website in the support section: ks-power.de/betriebsanleitungen. You can also go to the support section and download the full version of the manual by scanning the QR code, or on the website of the official importer of Könner &... -
Page 3: Safety With Gasoline - Powered Machines
Do not use flammable solutions to clean the air filter. • The muffler and engine become very hot and can cause severe burns; do not touch them. SPECIFICATIONS Model KS 15TKG 52/35 Engine power 6.5 HP Splitting force... -
Page 4: Log Splitter Operation
LOG SPLITTER OPERATION CHECKING THE FUEL LEVEL CHECKING THE FUEL LEVEL 1. Unscrew the fuel cap and check the fuel level in the tank. 2. Fill the fuel tank to the fuel filter level. 3. Tighten the fuel cap securely. Recommended fuel: Recommended fuel: only unleaded gasoline. -
Page 5: Regular Maintenance Checklist
Engine switch Closed Open air damper fuel valve Closed Open • Do not reach or step across the beam while the log splitter is running. This is a very UNSAFE method which WARNING! could cause personal injury or even death. •... -
Page 6: Spark Plug Maintenance
PROCEDURE Check Motor oil Replace First time 5 hours Check Air filter Clean out Replace Check general equipment Check Grease surface of slide rail Lubricate Check belts Check Grease rack and pinion Lubricate Clean engine exterior and Clean out cooling Gap check and control Spark plug... -
Page 7: Components In The Package
LUBRICATION All bearings of your splitter are sealed units and should be sufficiently lubricated to last the life of your machine WARNING! with normal use. The rack and pinion should be completely greased before every use. Before performing any maintenance procedure or inspection, stop the engine, wait five minutes to allow all parts to cool. - Page 8 STEP 2 STEP 2 STEP 3 STEP 3 Vee Belt www.ks-power.de/en...
- Page 9 STEP 4 STEP 4 4-26 Flat washer 4-M6x16 Hex bolt STEP 5 STEP 5 WARRANTY SERVICE TERMS The international manufacturer warranty is 1 year. The warranty period starts from the date of purchase. In cases where a warranty period is longer than 1 year according to local legislation, please contact your local dealer. The Seller of the product is responsible for granting the warranty.
- Page 11 CONTACTS Deutschland: DIMAX International GmbH Deutschland, Hauptstr. 134, 51143 Köln, www.ks-power.de Ihre Bestellungen Ihre Bestellungen orders@dimaxgroup.de Kundendienst, technische Kundendienst, technische Fragen und Unterstützung Fragen und Unterstützung support@dimaxgroup.de Garantie, Reparatur und Garantie, Reparatur und Service Service service@dimaxgroup.de Sonstiges Sonstiges info@dimaxgroup.de Polska: DIMAX International Poland Sp.z o.o.
Need help?
Do you have a question about the KS 15TKG 52/35 and is the answer not in the manual?
Questions and answers