Related Manuals for Könner & Söhnen KS 7THE 52/30
Summary of Contents for Könner & Söhnen KS 7THE 52/30
- Page 1 Owner’s Manual Please, read this manual carefully before use! Electric horizontal log splitter KS 7THE 52/30 KS 8TKE 52/35...
-
Page 2: Safety Information
INTRODUCTION Thank you for your purchase of Könner & Söhnen products. This manual contains a brief description of safety, use and debugging. More information can be found on the official manufacturer’s website in the support section: ks-power.de/betriebsanleitungen. You can also go to the support section and download the full version of the manual by scanning the QR code, or on the website of the official importer of Könner &... -
Page 3: Safety With Electric - Powered Machines
SAFETY WITH ELECTRIC - POWERED MACHINES Never overlook the hazards of electricity. WARNING! Always follow these precautions: • Never operate the Log Splitter unless the electri- cal cord is plug • Never open the switch box or motor cover. Never attempt any electrical repairs yourself. -
Page 4: Specifications
(RCD) with a maximum residual current rated at 0.03A. MAIN OVERVIEW HYDRAULIC LOG SPLITTER KS 7THE 52/30 Check these components according to the following list and Figure 1 below: A. - Page 5 6. Cradle 9. Belt 4. Splitting Wedge 7. Frame Stand 10. Flywheel LOG SPLITTER KS 7THE 52/30 OPERATION Log splitter is supplied without the hydraulic oil. Please don’t start the engine without filling the sufficient WARNING! amount of hydraulic oil.
- Page 6 Press the green button to stop the log splitter. Tighten the screw (Fig. 3) and unplug the appliance when operation is finished. Re-tighten the screw when the work is complete or when moving the log splitter to avoid oil leaks. Never force the splitting of a log by sustaining the hydraulic pressure for more than 5 seconds.
- Page 7 WARNING! log. MAINTAINING THE HYDRAULIC LOG SPLITTER KS 7THE 52/30 SHARPENING THE WEDGE AND CLEANING THE GUIDE RAIL SHARPENING THE WEDGE AND CLEANING THE GUIDE RAIL After using the log splitter for some time, sharpen the wedge using a fine tooth file and smooth any burrs or rough edges along the cutting edge.
- Page 8 REPLACING HYDRAULIC OIL REPLACING HYDRAULIC OIL Replace the hydraulic oil in the log splitter after every 150 hours of use. Take the following steps to replace the oil: 1. Make sure all moving parts are stopped and the log splitter is unplugged. 2.
-
Page 9: Regular Maintenance Checklist
Clean motor exterior and cooling fins Motor oil changing KS 7THE 52/30 Potential faults and troubleshooting methods can be found in the full version of the manual. Potential faults and troubleshooting methods can be found in the full version of the manual. - Page 11 CONTACTS Deutschland: DIMAX International GmbH Deutschland, Hauptstr. 134, 51143 Köln, www.ks-power.de Ihre Bestellungen Ihre Bestellungen orders@dimaxgroup.de Kundendienst, technische Kundendienst, technische Fragen und Unterstützung Fragen und Unterstützung support@dimaxgroup.de Garantie, Reparatur und Garantie, Reparatur und Service Service service@dimaxgroup.de Sonstiges Sonstiges info@dimaxgroup.de Polska: DIMAX International Poland Sp.z o.o.
Need help?
Do you have a question about the KS 7THE 52/30 and is the answer not in the manual?
Questions and answers