Husqvarna Weed Eater WE18C Operator's Manual page 5

ASSEMBLY INSTRUCTIONS
Fig. 3
USING THE CORD RETAINER (See Figure 5-7)
This lawn mower is equipped with a cord retainer in order to prevent the extension cord from
disconnecting from the power cord while the mower is in use. The cord retainer hangs from the cord
guide bar.
NOTE: Do not plug the extension cord into the outlet until it has been connected to the cord retainer
and plugged into the mower.
To use the cord retainer:
• Fold the extension cord in order to forming a tight loop near the retainer.
• Push the loop through the bottom hole in the retainer (See Figure 5).
• Slide the loop over the retaining clip, and pull down until the cord is secured (See Figure 6).
1
2
6
Fig. 5
Fig. 6
ENGLISH - 4
5 3 4
Fig. 4
Fig. 7