Measuring Special Materials; Measuring Heavy Reflective Materials - Barbieri Spectro LFP S3 Operating Manual

3.3 Measuring special materials

For measuring special reflective or transmissive materials there is a
set of 3 special sample holders available. (See page 6)

3.3.1 Measuring heavy reflective materials

When measuring heavy reflective materials, the optional sample holder
for heavy materials must be used.
16
Spectro LFP RT - Operating Manual
It consists of a metallic holder
with 2 magnets which are used to
fix the sample. The anti-slip mat
helps keep target from moving
during measuring.
This sample holder can be used
for samples up to 3 kg of weight.
Fix the side guide and the sample
holder on your instrument.
The target sample must be fixed
with the two magnets and pushed
towards the upper left corner of
the sample holder.