Pairing Headset With Other Bluetooth Transmitting Devices - Sony DR-BT21IK/B Operating Instructions Manual

When press  on the iPod, the music pause. The indicator flashes twice on the
*
1
transmitter. The transmitter transmits the data of no sound.
* When press the pause button on the Bluetooth receiving device, the music
2
pause. The indicator flashes once on the transmitter. The transmitter does not
transmit the music.

Pairing headset with other Bluetooth transmitting devices

1
Place the Bluetooth transmitting device to be paired together
within 1 m (3 ft) of the headset.
2
Press and hold the POWER button of the headset for about 7
seconds or more to enter "Pairing in process" while the headset is
turned off.
Release the POWER button when the headset indicator starts
flashing quickly. The headset enters the pairing process.
3
Turning Bluetooth transmitting device to pairing standby
mode.
See the operating instructions supplied with the Bluetooth transmitting
device.
The list of detected devices appears on the display of the
Bluetooth transmitting device.
The headset is displayed as "DR-BT21G. "
This headset indicator status will vary as follows, and pairing is
established with the Bluetooth transmitting device.
2
US US