Whirlpool LSA1300 User Manual page 10

Whirlpool | User Manual
Control Panel and Features
ON/OFF
PrOgram
Start/PauSe
CHeCK Water
6 SeNSe
th
Key LOCK
Water LeveL
SuPer SOaK
extra riNSe
DeLay eND
DigitaL DiSPLay
CyCLe StatuS
Note:
• Sometimes the water level goes to High even for a low load of clothes. This is a safety measure to prevent
cloth damage in case of low voltage.
• If there is water already in the wash tub, the machine will automatically set the water level as High. In
addition, if wet clothes are put into the washer, higher water level will be chosen.
• To ensure best wash performance short soak is inbuilt in every wash process.
• In case of 'wool' cycle the machine automatically fills the tub up to the 'High' water level. This ensures that
your precious woolen fabrics are always washed gently.
• Use dissolved detergent with warm water to prevent the detergent clumping
10
• Press the On/Off button to turn the Washer On or to manually Off the washer.
• machine switches Off automatically at the end of wash process.
• Select the appropriate program depending on the type of fabric to be washed
and how dirty they are.
• Press the program button repeatedly to arrive at the desired program (P1 to P10).
• Press Start button to begin the wash process.
• Pressing this button again will cause the machine to 'PAuSE'. You can add
clothes/change the selected program/options if required.
• It indicates no water supply to the Washer.
• It indicates the 6 th sense (Auto Precision Water Selection) phase during wash
process of machine.
• Press Delay End & Extra Rinse button together until key Lock
• To unlock press both buttons again until the Key lock LED goes Off.
• During Key lock mode, no button can be operated.
• Key Lock option can be activated only when machine is in operation.
• nOTE: In case of any urgency during key lock mode, switch off the main power.
• 6 Sense automatically selects the optimum water level for the wash load to
th
ensure best wash performance.
• If required, you can manually select the water level by pressing this button and
ensure that the clothes are submerged in water.
• Select Super Soak option for heavily soiled clothes.
• Select Extra Rinse for additional rinse of 2x (2 times rinse ) or 3x (3 times rinse)
as per requirement.
• Select Delay End to set a delay in end time for the selected wash program.
• Delay hours will be indicated in the digital display.
• The digital display will be indicating the program number, time left for
completing the wash cycle, error signals and delay in hours (while using delay
end feature).
• This bar will indicate the status of the wash process. machine will give out a
chime once the wash process is completed.
For Model: LsA1300
Images used in this page are for illustration purpose only
LED glows.