Listening To Music; This Unit; Bluetooth Device - Sony DR-BT140Q Operating Instructions Manual

OPERATING THE UNIT

Listening to music

>
Nx
.
Check the following before
operating the unit.
– The Bluetooth device is turned
on.
– Pairing of this unit and the
Bluetooth device is complete.
– The Bluetooth device supports the
transmitting music function
(profile: A2DP*).
1
Press and hold the
POWER button for
about 2 seconds while
the unit is turned off.
The indicator (blue) and
indicator (red) flash together
twice and the unit is turned on.
Note
After the unit is turned on, the unit
attempts to connect to the last
connected Bluetooth device
automatically with HFP or HSP.
14
US
VOL – button
VOL + button
POWER button
When not calling with this unit, do
not make the last connected
Bluetooth device ready for HFP or
HSP connection. To make or receive
a call while playing back music, see
page 20.
2
Make the Bluetooth
connection (A2DP) from
a Bluetooth device to

this unit.

Refer to the operating
instructions supplied with the
Bluetooth device on how to
operate it.
3
Start playback on the

Bluetooth device.

Tip
Bluetooth connection of A2DP
(Advanced Audio Distribution Profile)
can also be operated with the jog switch
from this unit to the Bluetooth device
except when making a call on this unit.
Notes
• When you play music by connecting the
unit to a Bluetooth device using HSP
(Headset Profile), sound quality will not
be high. For better sound, change the
Bluetooth connection to A2DP by
operating the Bluetooth device.
• If this unit is turned off while an A2DP
Bluetooth connection is established,
operate the unit again from step 1 to
make the A2DP Bluetooth connection
again.
* For detail on profiles, see page 4.