6. Turn over the M.2 solid-state drive with the bracket. Remove the screw
solid-state drive from the bracket
7. Install the new M.2 solid-state drive to the bracket
8. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then, carefully insert the
drive with the bracket into the slot
9. Reinstall the base cover assembly.
10. Turn over the computer. Connect the ac power adapter and all disconnected cables to the computer.
2
.
1
and tighten the screw
1
. Tighten the screw
2
.
1
, and then separate the M.2
2
.
.
Chapter 7
CRU replacement
57