• Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state drive
on a soft material, such as cloth, to absorb physical shocks.
Replacement procedure for the long M.2 solid-state drive
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 49.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn the computer over.
4. Remove the base cover assembly. See "Base cover assembly" on page 50.
5. Remove the screw that secures the M.2 solid-state drive
the secured position and pivots upward. Then, remove the M.2 solid-state drive out of the slot
1
. The M.2 solid-state drive is released from
Chapter 7
2
.
.
55
CRU replacement