DigiPos Retail Blade Millennium Technical Manual page 57

DigiPoS Millennium Technical Manual
Details Cont.
Feature
ECP Mode Use DMA
(If ECP Mode Selected)
Parallel Port EPP Type
(If EPP Mode Selected)
Onboard Serial Port 3
Serial Port 3 Use IRQ
Onboard Serial Port 4
Serial Port 4 Use IRQ
Onboard Legacy Audio
Sound Blaster
SB I/O Base Address
SB IRQ Select
SB DMA Select
MPU-401
Options Description
1 Select a DMA channel for the parallel port for use
3 during ECP mode.
You may have a device that requires an EPP parallel
EPP1.9
port. When it does it will also state the EPP port
EPP1.7
standard. Select it here as required.
Disabled
3F8H This item allows you to determine the access onboard
2F8H
serial port 1/port 2 controllers have with which IRQ
3E8H and I/O address.
2E8H
IRQ3
IRQ4
IRQ5 This item allows you to determine the access onboard
IRQ7 serial port 1/port 2 controllers have with which IRQ
IRQ9 and I/O address.
IRQ10
IRQ11
Disabled
3F8H This item allows you to determine the access onboard
2F8H serial port 1/port 2 controllers have with which IRQ
3E8H and I/O address.
2E8H
IRQ3
IRQ4
IRQ5 This item allows you to determine the access onboard
IRQ7 serial port 1/port 2 controllers have with which IRQ
IRQ9 and I/O address.
IRQ10
IRQ11
Disabled
Enables or Disables the onboard Multimedia device
Enabled
Allows the multimedia device to run in a sound blaster
Disabled
compatible mode. This may be necessary with some
Enabled
software programs.
220H
240H Selection for the Input/ Output base address of the
260H onboard multimedia.
280H
IRQ 5
IRQ 7 Selection for the IRQ address of the onboard
multimedia.
IRQ 9
IRQ 10
DMA 0
DMA 1 Select a DMA channel for the onboard multimedia to
DMA 2 use.
DMA 3
Disabled
Select Enabled to configure the MPU-401 interface.
Enabled
Page 57 of 81