Delay End
You can set the washing machine to finish your wash automatically at a later time,
choosing a delay of between 1 to 24 hours (in 1 hour increments). The hour displayed
indicates the time the wash will finish.
1. Select a cycle. Then change the cycle settings if necessary.
2. Press
Delay End repeatedly until a desired end time is set.
3. Press Start/Pause.
The Delay End indicator blinks and the washing machine tumbles the drum to sense the
weight of the load if you have selected the COTTON or
is preset and enabled only in these 2 cycles. When complete, the machine displays your
set time and the timer starts ticking.
4. To cancel the
Real-life case
You want to finish a two-hour cycle 3 hours later from now. For this, you add the Delay
End option to the current cycle with the 3-hour setting, and press Start/Pause at 2:00 p.m.
Then, what happens? The washing machine starts operating at 3:00 p.m., and ends at 5:00
p.m. Provided below is the time line for this example.
2:00 pm
Set Delay End to 3 hours
Untitled-18 39
Delay End, restart the washing machine by pressing Power.
3:00 pm
Start
COTTON cycle. Load sensing
5:00 pm
English 39
End
2019-07-01 PM 4:22:25