Diesel DZ1179 User Manual

Simple analog
Time SeTTing
1. Pull the crown out to position 2.
2. Turn clockwise and set the time.
daTe WaTCh
daTe SeTTing
1. Pull the crown out to position 2.
2. Turn counter-clockwise and set the date for the
previous day.
Time SeTTing
1. Pull crown out to setting 3.
2. Turn counter-clockwise to advance the time and continue
until the day/date changes to the present day.
3. Set the correct time.
4. Push crown back to position 1.
day/daTe WaTCh
daTe SeTTing
1. Pull the crown out to position 2.
2. Turn clockwise and set the date for the previous day.
day SeTTing
With crown still in position 2, turn counter-clockwise and
set the day for the previous day.
Time SeTTing
1. Pull crown out to setting 3.
2. Turn counter-clockwise to advance the time and continue
until the day/date changes to the present day.
3. Set the correct time.
4. Push crown back to position 1.
MULTI MOVEMENT GUIDE
Chronograph a
Time SeTTing
1. Pull crown out to position 3.
2. Turn crown to set the desired time.
1 2
3. Return crown to position 1.
daTe SeTTing
1. Pull crown out to position 2.
2. Turn crown counter-clockwise until the
3. Return crown to position 1.
Chronograph operaTion
1. Press A to start/stop the chronograph.
2. Press B for reset.
adJUSTing The Chronograph
1 2 3
1. Pull crown to position 3.
DATE
2. Press A to reset the second hand to "0."
3. Press B to reset the chronograph minute and hour hands.
4. Reset the watch to the current time and return crown to
Chronograph B
Time and daTe SeTTing
1. Pull crown out to position 2.
2. Rotate crown clockwise until the previous
DAY
3. Pull crown out to position 3.
4. Rotate crown clockwise until the correct
1 2 3
5. Continue to rotate crown to set correct am/pm time.
6. Return crown to position 1.
DATE
Chronograph operaTion
1. Press A to start/stop the chronograph.
2. Press B to restart/reset.
SpliT Time
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
Chronograph zero reSeT
1. If either of the chronograph hands is not at the zero
2. Press B to reset chronograph minute hand. Each press
3. Press A to reset chronograph 1/5 second hand. Each
Chronograph C
Time and daTe SeTTing
1. Before setting the time, make sure the
2. Pull crown out to position 2.
3. Turn crown clockwise until the previous day's
4. Pull crown out to position 3 when the second
5. Turn crown to set time.
6. Return crown to position 1.
Chronograph
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
SpliT Time
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
Chronograph zero reSeT
1. If either of the chronograph hands is not at the zero
2. Press A to move hands clockwise; press B to move
3. Return crown to position 1.
- 1 -
correct date is shown in the date window.
position 1.
CHRONOgRApH
1/5 SECOND HAND
CHRONOgRApH
MINUTE HAND
day's date is shown in the date window.
date is shown in the date window.
Note: Do not set the date between 9:00 p.m. and
12:30 a.m. to ensure accuracy.
Note: After 2 hours of continuous running, the
chronograph will automatically stop and reset to save
the battery.
(12:00) position, pull crown out to position 2.
of B will advance the chronograph minute hand by one
increment or press and hold B for fast advance.
press of B will advance the chronograph 1/5 second
hand by one increment or press and hold B for fast
advance.
chronograph is stopped and set to zero
(12:00) position.
date is displayed.
hand is at the 12:00 position.
Note: 24-hour hand moves correspondingly with
the hour and minute hands. When setting the time
be sure to check that the 24-hour hand is set properly.
Note: When the crown is in position 2, do not press the
pushers. otherwise the chronograph hands will move.
(12:00) position, pull crown out to position 3.
hands counter-clockwise.
MINUTE
HAND
A
HOUR
HAND
1 2 3
SECOND
B
HAND
A
SECOND
HAND
1 2 3
B
DATE
24-HOUR
A
HAND
MINUTE
HAND
1 2 3
B
SECOND
HAND