Layout And Items Supplied; Proper Use; Technical Data - EINHELL TC-AC 200/24/8 OF Kit Original Operating Instructions

workshop.
Do not lose these safety instructions

2. Layout and items supplied

2.1 Layout
1. Housing cover
2. Pressure vessel
3. Wheel
4. Supporting foot
5. Quick-lock coupling (regulated compressed
air)
6. Pressure gauge
(for reading the preset tank pressure)
7. Pressure regulator
8. ON/OFF switch
9. Transportation handle
10. Safety valve
11. Drainage screw for condensation water
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Original operating instructions
•
Safety information
Anl_TC_AC_200_24_8_OF_EX_UK_SPK7.indb 8 Anl_TC_AC_200_24_8_OF_EX_UK_SPK7.indb 8
GB

3. Proper use

The compressor is designed for generating
compressed air for tools operated by compressed
air.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains connection: .................. 220-240 V ~ 50 Hz
Motor rating kW: ............................................ 1.2
Compressor speed min-1: .......................... 3450
Operating pressure bar: ................................... 8
Pressure vessel capacity (in liters): ................ 24
Theoretical suction rate l/min.: ..................... 180
Output (compressed air) at 7 bar: .... 45 liters/min
Output (compressed air) at 4 bar: .... 70 liters/min
Sound power level LWA in dB: ........................ 97
Uncertainty KWA ..................................... 0.28 dB
Sound pressure level LpA in dB: .................... 76
Uncertainty KpA ...................................... 0.28 dB
Protection type: ........................................... IP20
Weight of the unit in kg: .............. approx. 15.5 kg
Noise
The noise emission values were measured in ac-
cordance with EN ISO 3744.
- 8 -
26.05.2020 09:26:24 26.05.2020 09:26:24