Specifications; Dne-1000 Digital News Editing Workstation - Sony DNE-1000 Operation Manual

Specifications

Design and specifications are subject to change
without notice.
DNE-1000 Digital News Editing
Workstation
General
Power requirements 100 to 240 V AC, 50/60 Hz
Current consumption
Max. 3.5 A (with all options)
Peak inrush current
(1) Power ON, current probe method:
16 A (100 V), 30 A (240 V)
(2) Hot switching inrush current, measured in
accordance with European standard
EN55103-1: 15 A (230 V)
Power supply power factor
At least 90%
Temperature Storage: –20 to +55°C
(– 4 to +131°F)
To guarantee operation: 5 to 40°C
(41 to 104°F)
To guarantee performance: 10 to
35°C (50 to 95°F )
Relative humidity To guarantee operation: at least
80%
To guarantee performance: at least
70%
424 × 221.2 × 450 mm (w/h/d)
Dimensions
3
(16 /
(without projections)
Mass 20 kg (44 lb 1 oz)
Video input/output connectors
Digital input
PRIMARY INPUT IN1 to IN8
BNC (× 8), 75 Ω
SDI SMPTE259M, 270 Mbps
Digital output
BNC (× 3), 75 Ω
PGM 1 to 3
SDI SMPTE259M, 270 Mbps
EDIT PVW 1 and 2
BNC (× 2), 75 Ω
SDI SMPTE259M, 270 Mbps
BNC (× 1), 75 Ω
CAPTURE
SDI SMPTE259M, 270 Mbps
12(E)
× 8 × 17
3 3
/ / inches)
4 4 4
Other
BNC (× 2, loop-through), 75 Ω
REF IN
0.3 to 2 Vp-p, analog black burst
signal or composite sync, 525/
625 common
Audio input/output connectors
Digital input
PRIMARY INPUT
BNC (× 8), 75 Ω, shared connector
with video input
SDI with embedded audio signal
(SMPTE 259M, 270 Mbps), each
video channel can carry four
embedded audio channels
AUX INPUT 1 to 4
XLR 3-pin (× 4), female, 110 Ω
48 kHz (or 44.1 kHz), AES/EBU
with transformer
Digital output
PGM OUT 1/2, 3/4
XLR 3-pin (× 2), male,
110 Ω, 48 kHz, AES/EBU with
transformer
BNC (× 3), 75 Ω, shared connector
PGM 1 to 3
with video input
SDI with embedded audio signal
(SMPTE 259M, 270 Mbps), each
video channel can carry four
embedded audio channels
Analog outputs
MONITOR L, R XLR 3-pin (× 2), male, 150 Ω,
balanced, 1 kHz
Analog audio signals
Reference output levels: +4 dBs,
600 Ω load
Other
WORD SYNC OUTPUT
BNC (× 2), 75 Ω
Word clock signal, TTL levels
Supported sampling rate: 48.0 kHz