Laserworld Ecoline Series Manual page 5

8.1. Menu operation Instructions
To save your current selection as default value (active after restart)
press the enter button for 5 seconds. Your selection will be your default
setting.
Channel
R1
G1
B1
Y1
C1
P1
H1
AUTF
AUTS
AUTH
SO1
A001
SLAV
8.2. Automatic, Stand-alone operation
Set the device to auto mode:
Auto cycles the built-in programs without being controlled externally.
Function
Red Auto mode
(Number 1-9 shows strobo speed)
Green Auto mode
(Number 1-9 shows strobo speed)
Blue Auto mode
(Number 1-9 shows strobo speed)
Yellow Auto mode
(Number 1-9 shows strobo speed)
Cyan Auto mode
(Number 1-9 shows strobo speed)
Purple Auto mode
(Number 1-9 shows strobo speed)
White Auto mode
(Number 1-9 shows strobo speed)
Auto Mode with fast run speed
Auto mode with slow run speed
Auto mode with white color
Sound-to-light mode active
DMX mode, DMX address from 1-511
Slave mode
8.3. Music mode, Sound-to-light operation
Your device runs in music mode:
The laser effects are triggered by sound. Turn the sensitivity pot in the clockwise
direction to increase sound sensitivity, turn the pot in the counter-clockwise
direction to decrease sensitivity. The laser effect will automatically turn off after 5
seconds without music input.
8.4. Master-Slave-Mode (Slav)
To use the daisy chain / Master-Slave-Mode connect two (or more) laser projectors
of the same series via DMX cables:
Master projector (DMX out) -> DMX cable -> slave projector 1 (DMX in) ;
slave projector 1 (DMX out) -> DMX cable -> slave projector 2 ...etc.
Master projector
DMX cable
Select auto or music mode
at the master projector
(see above)
8.5. DMX-512 mode
Connect a DMX controller to operate the laser. The laser uses 7 DMX channels,
so make sure that the next device uses an address that doesn't overlap with this
range.
Channel Value
1 0 -49
50 - 99
100 - 199
200 - 249
250-255
2 0 - 255
Slave projector
To use this mode, please press the
MODE button until the display shows
SLAV and confirm by pressing Enter.
Function
Laser off
Automatic mode
Automatic mode - slow
Sound-to-light
DMX active
Red intensity