Sony DVP-NS500V Operating Instructions Manual page 31

Enjoying the surround sound effects
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in pages 22 to 25
( through ). Each of these are the default settings and do not need to be adjusted when
B D
you first connect the player. Refer to page 72 for using the Setup Display.
Audio Connection (pages 22 to 25)
A
No additional settings are needed.
B-1
Item
DISTANCE
BALANCE
LEVEL
If the sound distorts even when the volume is turned down, set "AUDIO ATT" to "ON" (page 77).
B-2 C-2 D-2
Item
DOWNMIX
DIGITAL OUT
Set "48kHz/96kHz PCM" to "96kHz/24bit," only if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency (page 78).
D-1
C-1
Item
DOWNMIX
If the sound distorts even when the volume is turned down, set "AUDIO ATT" to "ON" (page 77).
You select
Set according to the connected
speakers
You select
DOLBY SURROUND
ON
You select
DOLBY SURROUND
Page
80
Page
77
77
Page
77
31