Advertisement
INTRODUCTION
The
COP8-PRO-COB1
provides a low cost, easy-to-use environment for
quickly starting the development and debugging
of COP8 OTP/ROM applications.
The
development
environment
Windows IDE, with COP8 Assembler, Linker,
Librarian, Instruction Simulator, and COP8 Code
Generator and C-Compiler demos.
comprehensive documentation and sample source
code to quickly develop and simulate your
application.
Download your code to any COP8 OTP/EPROM
programmer for updating the COP8 device on the
COBALT (COP8 Breadboarding and Learning
Tool) Prototyping/Target board for 10MHz real-
time execution and pin probing. Or you can skip
the OTP/EPROM device, and download to an
optional COP8 Emulator for real-time debugging.
The
COBALT
Prototyping
accommodates all the hardware necessary to
prototype, test, and debug a wide variety of
applications. It can also be used as your final
target environment, enclosed in an optional
enclosure.
SOFTWARE INSTALLATION
The enclosed CD contains the COP8 IDE tools,
and other COP8 tools and demos, app notes,
example source code files, and documentation,.
All you need is a standard PC running WIN OS,
with minimum 32MB of disc space
1.
COP8
IDE,
Librarian, Simulator, and ISP software.
Insert the CD, click on "Install Tools", and
follow directions. All are automatically installed
and configured under the Windows COP8 IDE.
COP8 OTP/ROM PROTOTYPING KIT
QUICKSTART MANUAL
Prototyping
Kit
includes
Use the
Target
board
Assembler/
Linker/
a
COP8-PRO-COB1 OTP/ROM Prototyping Kit
Includes:
- COP8 COBALT Target Board with 10MHz crystal
- Socketed COP8SGR740Q3 Windowed Sample
- COP8-NSDEV Development CD
- QuickStart Manual
- COBALT User's Manual
2. Tools Demos. Insert the CD and browse to
the /tools folder to install the tools demos:
a. Aisys DriveWay Device Driver Development
Tool (/tools/aisys/setup.exe)
b. Byte Craft C-Compiler demo
(/tools/cop8c/Win16 or Win32)
c. IAR Embedded Workbench with COP8
Assembler only, or C-Compiler demo
version: (/tools/iar/../ewcop8...)
3. Software Source Code Modules, and
Applications Source Code. Insert the CD and
browse to the /software folder:
a. App notes source files (/software/an....sw)
Source code for many of the app notes.
1
COP8 OTP/ROM Starter Kit, QuickStart Manual – procob1qs.doc
Revision 1.0, 8/2001
for COP8-PRO-COB1
Advertisement
Table of Contents
Related Manuals for National Semiconductor COP8-PRO-COB1
Summary of Contents for National Semiconductor COP8-PRO-COB1
- Page 1 Download your code to any COP8 OTP/EPROM programmer for updating the COP8 device on the COP8-PRO-COB1 OTP/ROM Prototyping Kit COBALT (COP8 Breadboarding and Learning Tool) Prototyping/Target board for 10MHz real- Includes: time execution and pin probing. Or you can skip...
- Page 2 Revision 1.0, 8/2001 b. Sample .asm and C source utilities b. COP8 Feature Family User’s Manual (/software/utility) (/manuals/feature.pdf) c. Other sample source code and apps. c. COP8SA Designer’s Guide (Applies to (/software/misc) COP8SE/SG/AJ/AK also) (/manuals/Cop8SAx_des_gd.pdf) 4. Technical Documentation and Literature. d.
- Page 3 Revision 1.0, 8/2001 First, set up your environment for code Browse the CD for app notes and existing development. Refer to the IDE Help files for source code that match your desired information and tutorials. National’s COP8 IDE application. Use and modify as needed. supports a complete set of tools, including Browse the CD for source code example Simulator, COP8-EM/DM Emulator Debugger,...
Need help?
Do you have a question about the COP8-PRO-COB1 and is the answer not in the manual?
Questions and answers