Software Boot Menu - TC Electronic G-Force Service Manual

Software Boot Menu

To access the Software Boot Menu; press the ENTER button while powering on.
Option
Load PCMCIA Load Application or Boot software directly from PCMCIA card. See also service note no. 720 10 04 02 in appendix
Load Link Used for loading Application software from MIDI IN. See also service note no. 720 10 04 01 in appendix
Save Link Used for saving Application software to MIDI OUT. See also service note no. 720 10 04 01 in appendix
Reset Master Reset. Run this command and all global and preset settings are reset!!!
Info Display the Device type, the Serial no. and software version
Start Start the loaded software
______________________________________________________________________________________________________________________________________________________________________________
__________________
TC Electronic A/S
Description
G-Force Service manual page 5