Step 4: Connecting The Audio Cords - Sony DVP-NC625 Primary Operating Instructions Manual

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
• Surround effects: TVS DYNAMIC (page 45),
TVS WIDE (page 45)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 45)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 45)
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 60)
AV amplifier (receiver) with a digital input jack
having a Dolby Digital or DTS** decoder and 6
speakers
• Surround effects: Dolby Digital (5.1ch) (page 60),
DTS (5.1ch) (page 60)
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
** "DTS" and "DTS Digital Out" are trademarks
of Digital Theater Systems, Inc.
through .
A D
Connection
(page 18) Example
A
(page 19) Example
B
(page 20) Example
C
(page 21) Example
D
Your setup
,continued
17