TOPSKY S-203 Quick Start Manual

Download this manual

T O P S K Y

DO NOT RETURN !!!

Please contact our service team with Order-ID. And if that is possible,pictures or

detail of issue will be helpful for a fast way solution.

Special Warnings

Keep your furniture out of direct sunlight. Please use desk pads and coasters to protect

the surface from dents, scratches, and moisture from hot or cold liquids.

For cleaning, wipe the surface with a damp (not wet) cloth or wipe dry with a clean lint

free cotton cloth. Window cleaning liquid or a similar cleaning liquid can be used to

clean glass surface.

Operation Instructions

Please check that all parts are present before you start the assembly of your furniture.

For the protection of your furniture, place all parts on a clean and smooth surface to

prevent any damage.

Please periodically check all fitting and re-tighten as necessary.

Please assemble the table by 2 persons or more.

Do NOT over tighten hardware.

service@topskyfurniture.com

Phone number: +1 725-333-1988

TS500004

Need help?

Do you have a question about the S-203 and is the answer not in the manual?

Page 1 TS500004 T O P S K Y DO NOT RETURN !!! Please contact our service team with Order-ID. And if that is possible,pictures or detail of issue will be helpful for a fast way solution. service@topskyfurniture.com Phone number: +1 725-333-1988 Special Warnings Ø...
Page 2 TS500004 Part. Item. QTY. M6X45 M6X30 M6X40 M8Xɸ50...
Page 3 TS500004 .SCREWS M8Xɸ50 Please make sure all screws have fitted into the holes properly. * Take note that screws can't be tightened before the whole assembling complete. .SCREWS M6X45 .SCREWS M6X45...
Page 4 TS500004 .SCREWS M6X45 .SCREWS M6X45 .SCREWS M6X30 .SCREWS M6X40 * When you find there is a gap between two boards or two boards aren't flat, or asymmetrical, please adjust screws to improve. Take note that screws can't be tightened before the whole assembling complete.

Ts500004