Risk To Breathing; Risk From Moving Parts; Hot Surfaces - DeWalt D55250 Instruction Manual

5135176-00,01Gas Hand Carry
combustible materials, gasoline or solvent vapors. If
sparks from the compressor come into contact with
flammable vapors, they may ignite, causing fire or
explosion. When spraying flammable materials,
locate the compressor at least 20 feet upwind from
the spray area. An additional length of hose may be
required.
Store flammable materials in a secure location away from
compressor.
Restricting any of the compressor ventilation openings will cause
serious overheating and could cause fire. Never place objects
against or on top of compressor. Operate the compressor in an
open area at least 3 feet away from any wall or obstruction that
would restrict the flow of fresh air to the ventilation openings.
RISK FROM FLYING OBJECTS
The compressed air stream can cause soft tissue damage to
exposed skin and can propel dirt, chips, loose particles and small
objects at high speed, resulting in serious injury. Always wear A N S I
Z28.1 approved safety glasses with side shields when using the
c o m p r e s s o r. Never direct air stream at people or animals. Use only
O S H A approved air blow guns.

RISK TO BREATHING

The compressed air from your compressor is not safe
for breathing! The air stream may contain carbon
monoxide, toxic vapors or solid particles. Never inhale
air from the compressor either directly or from a
breathing device connected to the compressor.
Sprayed materials such as paint, paint solvents, paint
r e m o v e r, insecticides, weed killers, etc. contain
harmful vapors and poisons. N O T E : Operate the compressor only
in a well ventilated area. Read and follow the safety instructions
provided on the label or safety data sheets for the material you are
spraying. Use a NIOSH/MSHA approved respirator designed for
2/10/03 2:54 PM Page 2

HOT SURFACES

COMPRESSOR
PUMP HEAD
COMPRESSOR
CYLINDER
use with specific application.

RISK FROM MOVING PARTS

The compressor is designed to run continuously.
Always turn off the compressor,
pressure from the air hose and tank, before
performing maintenance or attaching tools and
accessories.
Keep your hair, clothing, and gloves away from
moving parts. Loose clothes, jewelry, or long hair
can be caught in moving parts. Air vents may cover moving parts
and should be avoided as well. Do not remove the protective covers
from this product. Never operate compressor with guards or
protective covers that are damaged or removed. Never stand on
the compressor.
HOT SURFACES
Touching exposed metal such as the compressor head or outlet tube
can result in serious burns. Never touch any exposed metal parts
on the compressor during or immediately after operation. Com-
pressor will remain hot for several minutes after operation. Do not
move the compressor while it is running. Hot motor parts could cause
2
TRANSFER TUBE
(NOT SHOWN)
MUFFLER
ENGINE
CYLINDER
and bleed