Overview In The Dlan Network With The Informer - Devolo Highspeed Ethernet User Manual

3.4

Overview in the dLAN network with the Informer

Due to the Informer you always have an overview of all dLAN adapters in your
dLAN network. The Informer shows the dLAN adapter connected directly to the
computer as well as all dLAN adapters that are included into the same dLAN
network.
The Informer displays information about all dLAN devices in your network, such
as their MAC addresses for dLAN and current transfer speeds. Via Device
Rename you can change the name of the selected device.
Right-clicking on one of the dLAN adapters opens a context menu in which the
following commands are available:
b
b
Informer displays only those dLAN adapters that are connected to the power
supply and added to your dLAN network. After about 15 minutes, a dLAN
adapter switches into stand-by mode unless there is an active device connected
to the Ethernet interface. dLAN adapters in stand-by mode are not shown in
Informer.
'Rename' opens a dialog in which you can assign a new name to the device.
'Start dLAN configuration wizard' opens a dialog in which you can add new
dLAN adapters to the dLAN network and assign the network password.
|
devolo dLAN software
|
devolo dLAN Highspeed Ethernet
13
|