Devolo Audio Extender User Manual page 19

can be started via the menu Device
the devolo Informer.
Before beginning with this step, make a note of the security IDs of all existing
dLAN adapters. This unique identifier of each dLAN device is located on the label
on the underside of the housing. It consists of 4 x 4 letters separated by dashes
(e.g. ANJR-KMOR-KSHT-QRUV). Ensure that all dLAN adapters are connected to
the power grid and computers or other network components as appropriate.
Scan for dLAN adapter
After launching the wizard, it initially scans for a dLAN adapter connected
directly to your computer.
Assign network password
In this step, select a network password that applies to all adapters in your
home network. The password must be used by all dLAN devices.
Three options are available:
Continue using the existing password
If you already have a network password, it is generally a good idea to use it for
the new dLAN adapter as well. If you do not want to continue using it, or you
would like to use an automatically generated password or one you have chosen
yourself, you will need to rebuild your dLAN network once with the, entering the
security IDs for each of the adapters.
Automatically generate a random network password
Alternatively, the dLAN Configuration Wizard can automatically generate a
password for use with your dLAN network.
Assign your own password/reset the password to factory default
You can also assign a password of your own, or restore the factory default pass-
word of your dLAN adapter.
The factory default password is "HomePlug".
|
Configuration
!
Start dLAN Configuration Wizard in
|
devolo dLAN Audio extender
19
|