Setting Up Internet Access Via A Browser; Overview - Devolo dsl+1100 User Manual

18
Router configuration
3.2

Setting up Internet access via a browser

If you cannot use the configuration wizard (e.g. if you are not using Windows as
your operating system) you can carry out the settings via the user interface.
The computer which is networked with the dsl
matically acquire network information (DHCP). Further information regarding
the correct setting is available in the documentation of your operating system.
3.2.1

Overview

The 'Enable WLAN' and 'Disable WLAN' buttons are located on the homepage.
|
devolo dsl+ 1100 WLAN
|
Next, the router configuration wizard will start automatically. It will start by
checking the computer's network settings and adjusting them if necessary.
Once the network settings are correct, the wizard will assist you in setting
up Internet access for your router.
Finally, the wizard will contact the website www.devolo.com to ensure that
the Internet access is working. If the Internet connection is working cor-
rectly, configure the other connected computers. Insert the devolo product
CD in the computers to be configured and run the 'dsl
lation' as a minimum. The wizard will then check the settings of the network
and correct them as necessary, and will skip setting up Internet access again
if so requested.
Open your web browser and enter the URL 'http://192.168.0.253'.
Click on the "Setup wizard" in order to configure your Internet access.
Select your country and click on Next.
Select your Internet provider and click on Next.
Enter your access information provided by your Internet provider (username,
password). Confirm the password and click on Next.
Complete the setting up of your Internet access with Finish. Your input is
then saved.
|
+
1100 WLAN instal-
+
1100 WLAN must be set to auto-