Electrical Connection; Before The Rst Use - Lattemento LM-166P Operating Instructions Manual

Lattemento
live your style

Electrical connection

To ensure the safe and correct operation of the device, the following inst-
GB
ructions must be observed when electrically connecting the device:

Before the rst use

30
Before connecting the device compare the connecting details (volta-
ge and frequency) on the type plate with those of your mains system.
The details must correspond to prevent damage to the device. Contact
your electrical expert in case of doubt.
The electrical outlet must be protected with at least a 10A circuit brea-
ker.
Make sure that the electrical cable is not damaged or routed via hot
surfaces or sharp edges.
The device may not be connected using an extension cable or outlet
strip.
The power cable may not be pulled taut.
The electrical safety of the device is only ensured if it is connected to
a properly installed protective ground system. Operating the device
from an outlet without earth conductor is forbidden. In case of doubt,
have the home wiring inspected by a certi ed electrician. The manu-
facturer does not assume any liability for damages caused by a missing
or interrupted earth conductor.
Remove the protective cardboard between base station and pitcher.
Before using the frother the rst time, clean the device as described in
the Chapter Cleaning and Care.
Milkfrother LM-166P