Maintenance - Enraf Nonius CROSSWALKER Instructions For Use Manual

7 MAINTENANCE

The Crosswalker does not require a lot of maintenance. It is important however that you have the
device checked annually by a service technician authorized by Enraf-Nonius.
An annual check by a service technician authorized by Enraf-Nonius is required to determine
whether the device can still be used safely or that it shall be taken out of service.
The manufacturer will not be held responsible for the results of maintenance or repairs by
unauthorized persons.
The use of non-original (replacement) parts and/or auxiliary equipment invalidates the
warranty and can be hazardous.
If the power cord is damaged, remove the power plug from the socket to prevent injury.
CLEANING
Before performing any cleaning, switch off the device and disconnect the plug from the mains
supply.
Clean the device with a damp cloth using a household cleaner.
Do not spray the cleaning agent directly on the glass panel.
Do not use cleaning agents that contain strong alkalis, lye, acid, detergents with fluoride or
detergents with ammonia. This may cause damage to the device.
EXPECTED SERVICE LIFE
This device will remain suitable for its intended use as long as it is subjected to yearly maintenance by
a qualified service engineer as described in the service manual.
The service engineer will decide whether the device is suitable for use according to the specifications.
END OF LIFE
Please ensure that you are well informed of the local rules and regulations regarding the
separate disposal of this Device from normal household waste so that they can be recycled.
Page 20 of 24 EN109-1413761-43 IFU