Description (Fig. A) - Princess 332928 Manual

Congratulations!
You have purchased a Princess product.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this product
for many years.

Description (fig. A)

Your 332928 Princess vacuum cleaner has
been designed for vacuuming dry substances.
The appliance is not suitable for vacuuming
wet substances. The appliance is suitable for
indoor use only. The appliance is suitable for
domestic use only.
1. On/off button
2. Mains cable rewind button
3. Speed control button
4. Full indicator
5. Handgrip
6. Dustbag compartment
7. Release button (dustbag compartment)
8. Hose
9. Tube
10. Extension tube
11. Airflow control switch
12. Suction nozzle
13. Floor surface selector
14. Wheels
15. Parking bracket
16. Crevice nozzle
17. Upholstery nozzle
18. Parquet floor nozzle
19. Hose connection
20. Locking knob (extension tube)
21. Accessory storage
22. Locking knob (accessory storage)
Assembly (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
- Before assembly, switch off the appliance
and remove the mains plug from the wall
socket.
Mounting and removing the
dustbag (fig. B - D)
The dustbag and the dustbag holder must be
properly mounted in order to close the cover
of the dustbag compartment.
Before you proceed, we need you to pay
attention to the following notes:
- Do not use the appliance without the
dustbag.
Mounting the dustbag
• Keep the release button (7) pressed and
open the cover (23).
• Remove the dustbag holder (24) from the
dustbag compartment (6).
• Insert the dustbag (25) into the slots (26)
of the dustbag holder (24) (fig. C1).
Slide the dustbag (25) to the end of the
dustbag holder (24) (fig. C2).
• Insert the dustbag holder (24) into the slot
(27) of the dustbag compartment (6).
Make sure that the dustbag holder (24) is
placed on the holders (28) (fig. D).
• Close the cover (23) until the release
button (7) clicks into place. Make sure that
the hole (26) in the dustbag (25) aligns
with the hose connection (19).
Removing the dustbag
• Keep the release button (7) pressed and
open the cover (23).
• Remove the dustbag holder (24) from the
dustbag compartment (6).
• Remove the dustbag (25) from the dustbag
holder (24).
• Insert the dustbag holder (24) into the slot
(27) of the dustbag compartment (6).
• Close the cover (23) until the release button
(7) clicks into place.
Mounting and removing the hose
(fig. A)
Before you proceed, we would like you to
focus your attention on the following notes:
- Before mounting the hose, make sure that
the dustbag compartment is inserted into
the appliance.
11