Advertisement
Display and operation
Contact indication
Show when external contact close.
(Parameter setting: All bars show when
value can be changed)
Vertical Bar: Fan speed or
progress indication
Display of party, Auto or manual
Left (POWER)
Turn unit ON or OFF. Text OFF
displayed with current time.
(Parameter setting: ESC key to
leave menu option, cancel
parameter change)
Operation Modes
STEP
Normal mode
OFF
Absence mode
Party mode (FULL)
HIGH
Full supply mode
Time schedule mode
Manual override
Power Failure
All the parameters and set points are memorized and do not need to be reentered. Depending on UP03 the unit will
remain switched off, switch on automatically or return to the operation mode it was in before the power failure.
Deluxe version only: Timer operation and daytime setting will be retained for 24h. The controller has to be connected to a
power supply for at least 10 hours for the backup function to operate accordingly.
Doc: 70-00-0588 V1.0, 20180928
Subject to alteration
Mode
mode
Heat/Cool
Press > 2 sec.:
Toggle Heat / Cool /
Fan only mode.
The ventilation is operating based on selected values
Ventilation is operated with on and off intervals. The intensity and
duration of both on and off intervals may be defined with parameters.
The default is 5.5 hours in off mode and 0.5 hours with minimum airflow.
Ventilation is fully activated. The reset time is shown on the display. It
may be set.
This mode is activated by an external input for example a switch on the
kitchen or bathroom exhaust fan. The Supply air opens full and the
return air is switched off. The values of full supply mode for both supply
and return air are selectable through parameters.
Airflow is defined by time schedules
Short term manual override of the time schedule value. After a fixed
reset time of 60 min the positioner will revert to the scheduled value.
Clock
Press < 2 sec.: Enable /
disable time schedules
Press > 2 sec.: Change
time and time schedules
© Vector Controls GmbH, Switzerland
www.vectorcontrols.com
TCT-MZ
Display and operation
Large Digits
Display of step, clock or parameter
value.
Small Digits
Display of set point, clock or
parameter number.
Up
Increment SET POINT
(Parameter setting: SCROLL menu
options and parameters)
Down
Decrement SET POINT
(Parameter setting: SCROLL menu
options and parameters)
Right (PARTY)
Toggle Party mode. In Party mode
air volume is maximum. Reset time
can be adjusted with up/down
buttons.
(Config mode: ENTER key to
change parameter and confirm
selection)
Page 4
Advertisement
