Update Recovery - Dell OptiPlex 5090 Service Manual

Small form factor
Hide thumbs Also See for OptiPlex 5090:
Table of Contents

Advertisement

Table 22. Passwords (continued)
Options
Enable Non-Admin Password Changes
Admin Setup Lockout
Enable Admin Setup Lockout
Master Password Lockout
Enable Active Password Lockout

Update Recovery

This section provides details on Update Recovery settings.
Table 23. Update Recovery
Options
UEFI capsule Firmware Updates
Enable UEFI Capsule Firmware Updates
BIOS Recovery from Hard Drive
BIOS Recovery from Hard Drive
BIOS Downgrade
Allow BIOS Downgrade
SupportAssist OS Recovery
SupportAssist OS Recovery
BIOSConnect
BIOSConnect
Dell Auto OS Recovery Threshold
Dell Auto OS Recovery Threshold
80
System setup
Description
This section contains a toggle switch which when on, user can
change system and hard drive password without the need for
admin password (OFF by default).
This section contains a toggle switch which allows the
administrator to control how users can or cannot access BIOS
setup (OFF by default).
This section contains a toggle switch which allows the user to
disable active password support (OFF by default).
Description
This field contains a toggle switch which allows the user to
enable or disable BIOS updates through UEFI capsule update
packages (ON by default).
This field contains a toggle switch which allows the user
to enable or disable recovery from certain corrupted BIOS
conditions from a recovery file on the user's primary hard
drive or an external USB key (ON by default).
This field contains a toggle switch which allows the user to
enable or disable flashing of the system firmware to previous
revisions.
This field contains a toggle switch which allows the user
to enable or disable the boot flow for SupportAssist OS
Recovery tool in the events of certain system errors (ON by
default).
This field contains a toggle switch which allows the user to
enable or disable BIOSConnect setup to attempt cloud Service
OS recovery if the main operating system fails to boot with a
set number of failures (ON by default).
This field allows the user to select the number of failed boot
attempts by the system before SupportAssist OS Recovery is
triggered. The options here are as below:

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D15s

Table of Contents