Subscribe to Our Youtube Channel
Related Manuals for jcb JCB-12ID
Summary of Contents for jcb JCB-12ID
- Page 1 POWER TOOL INSTRUCTION & USER MANUAL JCB-12ID Original Instructions IM-12ID-EN Iss: 02/2020...
- Page 2 Directive 2012/19/EU. It will then be recycled or dismantled in order to reduce the impact on the environment. Electric and electronic equipment can be hazardous for the environment and for human health since they contain hazardous substances. JCB-12ID Instruction & User Manual...
- Page 3 The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. JCB-12ID Designation of the tool (12 - 12Vdc, ID - Impact Driver) JCB-12ID Instruction & User Manual...
-
Page 4: Table Of Contents
NOISE INFORMATION VIBRATION INFORMATION OPERATING INSTRUCTIONS Intended Use Battery Replacing Bits ON/OFF Trigger Chuck Direction Selector Switch AUTOMATIC LED LIGHT and Overload Protection Repairs and Servicing, Maintenance, Transport and Storage WARRANTY STATEMENT GENERAL CERTIFICATE OF CONFORMITY JCB-12ID Instruction & User Manual... -
Page 5: General Power Tool Safety Warnings
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. JCB-12ID Instruction & User Manual... -
Page 6: Power Tool Use And Care
Use of any other accessories, or storing power tools. Such battery packs may create a risk of injury and fire. preventive safety measures reduce the risk of starting the power tool accidentally. JCB-12ID Instruction & User Manual... -
Page 7: Service
This will ensure that the safety of the power tool is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. JCB-12ID Instruction & User Manual... -
Page 8: Tool Specific Safety Warnings
JCB branded items, or similar equivalent quality. Do not insert standard 3. Safety instructions when using 25mm long hex bits directly into the chuck... -
Page 9: Charger Safety
CHARGER SAFETY JCB chargers are designed to WARNING! operate on standard household supply voltages. Check the rating Read all safety warnings, instructions plate of the charger matches your and specifications provided with the local supply voltage. (Note: the dual charger. Failure to follow all instructions... -
Page 10: Component List
RETAINING COLLAR CHARGER* AUTOMATIC LED LIGHT BATTERY PACK* - refer to page 11 for further CHUCK DIRECTION SELECTOR information LED CHARGE STATUS INDICATORS* SWITCH ON/OFF TRIGGER BATTERY CAPACITY GAUGE* GRIP BATTERY RELEASE BUTTON *If applicable JCB-12ID Instruction & User Manual... -
Page 11: Tool Technical Data
48Wh Times given as a guide only. Battery charge and discharge times dependant on age, usage and condition. CHARGER TECHNICAL DATA Charger Code Input Data Output Data JCB-12VFC AC 120V 50/60Hz 45W 12.6V d.c. 2.4A JCB-12ID Instruction & User Manual... -
Page 12: Noise Information
(such as assessment of exposure. the times when the tool is switched off or running idle). JCB-12ID Instruction & User Manual... -
Page 13: Vibration Information
Avoid using tools in temperatures of 10 ° exposure. or less. Plan your work schedule to spread any high THIS TOOL MAY CAUSE vibration tool use across a number of days. HAND-ARM VIBRATION SYNDROME (HAVS) IF USAGE IS NOT ADEQUATELY MANAGED JCB-12ID Instruction & User Manual... -
Page 14: Operating Instructions
Charger is connected to Make sure the ON/OFF Trigger (4) is not mains power operated when inserting or removing the Connected battery is battery. Use only JCB batteries: JCB-12- charging 15LI, JCB-12-20LI, JCB-12-30LI, JCB-12- Connected battery is fully 40LI. charged... -
Page 15: Replacing Bits
Trigger (4), check that the hex bit tool holder To tighten fixings: is correctly fitted in the bit holder chuck (1A). Set the rotation selector switch to clockwise rotation. JCB-12ID Instruction & User Manual... -
Page 16: Automatic Led Light And Overload Protection
Never try to repair the tool yourself. power supply. Take to an authorised service centre. JCB-12ID Instruction & User Manual... -
Page 17: Repairs And Servicing, Maintenance, Transport And Storage
Power tool lubrication JCB power tools are properly lubricated in the factory and are ready for use. Repairs and servicing Power tools should be subject to periodic preventative maintenance to ensure continued safe and reliable operation. If the power tool requires servicing or repair (eg loss of power) do not continue to operate the power tool. - Page 18 JCB-12ID Instruction & User Manual...
-
Page 19: Warranty Statement
In the unlikely event your JCB Power Tool is subject to a manufacturing fault within the warranty period, please contact the seller/retailer where the item was purchased. JCB Power Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions. -
Page 20: General Certificate Of Conformity
IEC 55014-1:2006+A1:2009+A2:2011 IEC 55014-2:2015 IDENTIFICATION DETAILS OF IMPORTER/US DOMESTIC MANUFACTURER CERTIFYING PRODUCT COMPLIANCE: Name: JCB Tools (Yellow and Black Tools Limited) Address: 55 Romsey Industrial Estate Romsey, SO51 0HR Tel no: +44 1794 834250 CONTACT INFORMATION OF INDIVIDUAL MAINTAINING RECORDS OF TEST RESULTS: Name: Tim Burgoyne, QA Technical Manager &... - Page 21 JCB-12ID Instruction & User Manual...
Need help?
Do you have a question about the JCB-12ID and is the answer not in the manual?
Questions and answers