(grounded) not use a power tool while you power tools. Unmodified plugs are tired or under the influence Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
Page 4
Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
Page 5
Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
Avoid storage in direct n) Recharge only with the sunlight. charger specified by JCB. Do not d) Do not subject battery pack to use any charger other than that mechanical shock. specifically provided for use with e) In the event of battery leaking, the equipment.
Page 7
Store in a avoid a hazard. dry and frost-free place. 3. The battery terminal not Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
Page 8
19. Charge only battery pack of the same model provided by JCB and of models recommended by JCB. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com...
Page 9
Double insulation Fuse T 3.15A time lag fuse with rated current of 3.15A Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
After recharge, slide it back into your tool. A simple push and slight pressure will be sufficient. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
It was designed for changing rotation of the chuck and for locking the on/ Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
• Overloaded: The tool is operated in a manner that causes it to draw an abnormally high current. In this Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
Do not attempt to open or remove any of the components. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
Page 16
For claims under this JCB warranty, please declarations, receipts or reports (e.g. from your contact the JCB Helpline. To make a claim you doctor), depending on the loss or damage. will need to provide proof of purchase in the form...