Page 1
POWER TOOL INSTRUCTION & USER MANUAL JCB-20BLID Original Instructions IM-20BLID-EN Iss: 02/2020...
Page 2
Directive 2012/19/EU. It will then be recycled or dismantled in order to reduce the impact on the environment. Electric and electronic equipment can be hazardous for the environment and for human health since they contain hazardous substances. JCB-20BLID Instruction & User Manual...
Page 3
The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. JCB-20BLID Designation of the tool (20 - 20Vdc, BL - Brushless, ID - Impact Driver) JCB-20BLID...
NOISE INFORMATION VIBRATION INFORMATION OPERATING INSTRUCTIONS Intended Use Battery Replacing Bits ON/OFF Trigger Chuck Direction Selector Switch AUTOMATIC LED LIGHT and Overload Protection Repairs and Servicing, Maintenance, Transport and Storage WARRANTY STATEMENT GENERAL CERTIFICATE OF CONFORMITY JCB-20BLID Instruction & User Manual...
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. JCB-20BLID Instruction & User Manual...
Use of any other accessories, or storing power tools. Such battery packs may create a risk of injury and fire. preventive safety measures reduce the risk of starting the power tool accidentally. JCB-20BLID Instruction & User Manual...
This will ensure that the safety of the power tool is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. JCB-20BLID Instruction & User Manual...
Bits can bend causing breakage used with this power tool are genuine or loss of control, resulting in personal good quality JCB branded items, or similar injury. equivalent quality. The use of low-grade or modified items may result in failure and possible operator injury.
CHARGER SAFETY JCB chargers are designed to WARNING! operate on standard household supply voltages. Check the rating Read all safety warnings, instructions plate of the charger matches your and specifications provided with the local supply voltage. (Note: the dual charger. Failure to follow all instructions...
COMPONENT LIST Standard JCB-18VFC charger illustrated, additional chargers available. Battery size shown for illustrative purposes only BIT HOLDER CHUCK BATTERY RELEASE BUTTON RETAINING COLLAR BELT CLIP ON/OFF TRIGGER CHARGER* - refer to page 11 for further information CHUCK DIRECTION SELECTOR...
Avoid using tools in temperatures of 10 ° exposure. or less. Plan your work schedule to spread any high THIS TOOL MAY CAUSE vibration tool use across a number of days. HAND-ARM VIBRATION SYNDROME (HAVS) IF USAGE IS NOT ADEQUATELY MANAGED JCB-20BLID Instruction & User Manual...
Green Battery Charge Status Make sure the ON/OFF Trigger (2) is not operated when inserting or removing the Charger is connected to battery. Use only JCB batteries: JCB-20- mains power 15LI, JCB-20-20LI, JCB-20-30LI, JCB-20- Connected battery is 40LI and JCB-20-50LI.
To tighten fixings: Before engaging the ON/OFF Variable Speed Trigger (2), check that the hex bit tool holder Set the rotation selector switch to clockwise rotation. is correctly fitted in the bit holder chuck (1A). JCB-20BLID Instruction & User Manual...
Never try to repair the tool yourself. power supply. Take to an authorised service centre. JCB-20BLID Instruction & User Manual...
Page 17
Power tool lubrication JCB power tools are properly lubricated in the factory and are ready for use. Repairs and servicing Power tools should be subject to periodic preventative maintenance to ensure continued safe and reliable operation. If the power tool requires servicing or repair (eg loss of power) do not continue to operate the power tool.
In the unlikely event your JCB Power Tool is subject to a manufacturing fault within the warranty period, please contact the seller/retailer where the item was purchased. JCB Power Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions.
IEC 55014-1:2017 IEC 55014-1:2006+A1+A2 IDENTIFICATION DETAILS OF IMPORTER/US DOMESTIC MANUFACTURER CERTIFYING PRODUCT COMPLIANCE: Name: JCB Tools (Yellow and Black Tools Limited) Address: 55 Romsey Industrial Estate Romsey, SO51 0HR Tel no: +44 1794 834250 CONTACT INFORMATION OF INDIVIDUAL MAINTAINING RECORDS OF TEST RESULTS: Name: Tim Burgoyne, QA Technical Manager &...