Welcome Congratulations on your brand new Calortrans M55 Mug transfer press. A very good choice! As excited as you probably are to start using the machine, please take some time to read through this manual. This document will help setting up the...
80 mm element already installed on the press Specs: Technical data: 1000 W / 240 V / 50 Hz Packing size: 375 x 375 x 220 mm Weight: 10 kg Calortrans / Wildfire Innovations B.V. Arkeneel 27 3905NS Veenendaal The Netherlands info@calortrans.com www.calortrans.com...
Page 5
The products placed under the transfer press, (e.g. mugs, bottles) will become hot according to the chosen temperature settings. Allow the product to cool down or use protective gear (such as heat-resistant gloves) to avoid burns! Calortrans / Wildfire Innovations B.V. Arkeneel 27 3905NS Veenendaal The Netherlands info@calortrans.com www.calortrans.com...
Safety IMPORTANT SAFETY INSTRUCTIONS! This manual was made to make the usage of the Calortrans transfer press as easy and safe as possible. It is therefore recommended that you read this manual carefully and follow the instructions step by step.
Page 7
• Allow the element to cool down before switching. • Keep these safety instructions in a safe place. Calortrans / Wildfire Innovations B.V. Arkeneel 27 3905NS Veenendaal The Netherlands info@calortrans.com www.calortrans.com...
Page 8
Machine in detail Pressure wheel Heat-element LCD-display On / Off switch Calortrans / Wildfire Innovations B.V. Arkeneel 27 3905NS Veenendaal The Netherlands info@calortrans.com www.calortrans.com...
Page 9
The on and off switch. Make sure that the power cord is plugged in before switching on the press. Switch the press off again before removing the power cord from the socket. Calortrans / Wildfire Innovations B.V. Arkeneel 27 3905NS Veenendaal The Netherlands info@calortrans.com...
Page 10
Display in detail Temperature Menu Status Value Timer Start Calortrans / Wildfire Innovations B.V. Arkeneel 27 3905NS Veenendaal The Netherlands info@calortrans.com www.calortrans.com...
Set the time and temperature to the recommended values for the product you are using. 6. Start This button starts the timer. You do not have to use this button as the timer automatically starts when closing the press. Calortrans / Wildfire Innovations B.V. Arkeneel 27 3905NS Veenendaal The Netherlands info@calortrans.com www.calortrans.com...
Page 12
Which time and temperature settings should you use? Every transfer has its own settings regarding temperature, time, and pressure. For example: Calortrans A+++ Mugs are to be sublimated at 180 ºC (356ºF) for 180 seconds. Please consult your transfer dealer for the recommended settings.
Page 13
Fixate the transfer (e.g. sublimation paper) on top of the product using heat resistant tape. Press the handle down to close the press. Once the time has passed the press will beep. Your transfer is now ready! Calortrans / Wildfire Innovations B.V. Arkeneel 27 3905NS Veenendaal The Netherlands info@calortrans.com www.calortrans.com...
Changing the element The Calortrans M55 comes with a 80 mm element. Other sizes are available and can easily be switched by following these steps. Switch off the machine Remove the powercord Unscrew the element cord Slide the element out...
Area. It is in that sense similar to the FCC Declaration of Conformity used on certain electronic devices sold in the United States. Please find the CE certificate here: www.calortrans.com/CE Calortrans / Wildfire Innovations B.V. Arkeneel 27 3905NS Veenendaal The Netherlands info@calortrans.com www.calortrans.com...