Advertisement
Quick Links
Advertisement
Related Manuals for Calortrans CT3838II
Summary of Contents for Calortrans CT3838II
- Page 1 Calortrans CT3838II MANUAL...
- Page 2 Safety IMPORTANT SAFETY INSTRUCTIONS For safe use of the Calortrans CT3838II Heatpress the following precautions should be taken. Before use: • Read the entire manual before using the press • Use the press only for textile transfers or products suitable for sublimations •...
- Page 3 TABLE OF CONTENT Manual Safety Table of content Machine in detail Technicality Specifications: Display in detail Preface Usermanual CE certification...
- Page 4 Machine in detail Display Power Handle Pressure regulator On/Off switch...
- Page 5 Display in detail Current Temperature 1. Pieces count 2. Target temperature Countdown timer Increase or decrease temperature and time Menu Technical specs: 2000W / 240V/50Hz Size with packaging: 450x550x460cm Weight: 23Kg...
- Page 6 Preface This manual was made to make the usage of the Calortrans CT3838II trans- fer press as easy and safe as possible. It is therefore recommended that you read this manual carefully and follow the instructions step by step. •...
- Page 7 Usermanual Step 1. Connect the power cord Check if the voltage is 230V before the machine is connected. The socket must be protected with at least 10 amps. Do not use an extension cable, this can cause overheating of the power cable and / or loss of voltage.
- Page 8 Usermanual Step 3. Setting the temperature and time 1. Press and hold the menu button (for a few seconds) until it beeps. The temperature setting will now flash. Use the arrow keys to increase or decrease the temperature. 2. Press the menu button again to set the time. Use the arrow keys again to decrease or increase the time.
- Page 9 Usermanual Step 4. Usage Once the transfer press has reached the working temperature. • Set the desired pressure corresponding with the material that you wish to press. • Place the product under the transfer press. • Press the handle all the way down until in clicks in place •...
- Page 10 CE Certificate...