Casio fx-82AU PLUS II User Manual page 12

Note
• The calculator switches to Linear Display automatically whenever you enter the STAT
Mode.
Specifying the Default Angle Unit
To specify this as the
default angle unit:
Degrees
Radians
Grads
90°= π/2 radians = 100 grads
Specifying the Number Format
Specifies the number of digits for display of a calculation result.
To specify this:
Number of Decimal
Places
Number of Significant
Digits
Exponential Display
Range
Fix: The value you specify (from 0 to 9) controls the number of decimal
places for displayed calculation results. Calculation results are rounded off
to the specified digit before being displayed.
Example: (LineIO) 100 ÷ 7 = 14.286 (Fix 3)
Sci: The value you specify (from 0 to 9) controls the number of significant
digits for displayed calculation results. Calculation results are rounded off
to the specified digit before being displayed.
Example: (LineIO) 1 ÷ 7 = 1.4286 × 10
Norm: Selecting one of the two available settings (Norm 1, Norm 2)
determines the range in which results will be displayed in exponential
Perform this key operation:
(SETUP)
(SETUP)
(SETUP)
Perform this key operation:
(SETUP)
(SETUP)
(SETUP)
(Norm 2)
14.29 (Fix 2)
-1
(Sci 5)
-1
1.429 × 10 (Sci 4)
-1
1.428571429 × 10
11
(Deg)
(Rad)
(Gra)
(Fix) -
(Sci) -
(Norm) (Norm 1) or
(Sci 0)