To Replace Battery - Heinner HBS-180SSGD Instruction Manual

www.heinner.com
V. BATTERY
Type 1: 1x3V lithium battery (CR2032). Please remove the isolation sheet from the battery
contact before use.
Type 2: 2x1.5V AAA batterie (excluded).

TO REPLACE BATTERY

Battery baffle
Battery baffle
Picture 1
Condition 1: Open battery case cover on the back of scale, if battery case is the type
shown in picture 1
A: take out the used battery with the aid of a cuspidal object, as shown in picture 1;
B: install new battery by putting one side of the battery beneath the battery baffle and
then please take note to the polarity.
Contact
Black tab
Picture 2
Condition 2: Open battery case cover on the back of scale, if battery case is the type
shown I picture 2
A: Pull the black tab outwards and the battery will come out
B: Install new battery by putting one side of the battery beneath the contact and then
press down the other side. Please take note to the polarity.
180kg, 2 X 1.5 AAA