How To Control The Fixture; Easy Controller - Nicols CRAZY LED User Manual

functions press the MENU button again.

4. HOW TO CONTROL THE FIXTURE

You can operate the unit in three ways:
1. By master/slave built-in preprogram function
2. By easy controller
3. By DMX controller
No need to turn the unit off when you change the DMX address, as new DMX address
setting will be effected at once. Every time you turn the unit on, it will show "7875" on the
display. After that the unit will be ready to receive DMX signal or run the built in programs.
4.1 MASTER/SLAVE BUILT IN PREPROGRAMMED FUNCTION
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when you
want an instant show. You have to set the first unit in master mode
(random show),
input jack will have nothing plugged into it, and its master LED will be constantly on and
sound LED will flash to the music. The other units will have to select
(2 light show) mode, Their DMX cables plugged into the DMX input jacks (daisy
chain) and the slave LED lights will be constantly on.
2-light show
In slave mode,
show. In order to create a great light show, you can set
contrast movement to each other, even if you have two units only.
4.2. Easy Controller (by CA-8)
The easy remote control is used only in master/slave mode. There is a
terminator for connect the easy controller inside the fixture. By connecting the
cable into DMX IN waterproof cable entry gland to the CA-8 terminator of the
first fixture, you will find that the remote control on the first fixture will control all
the other fixtures for Stand by, Function and Mode functions.
Blackout Blackout the unit
(show 1) or ...or
means the unit works as the master unit and
(show 12) and speed. Its DMX
22-
and select
(normal) or
means 2-light
on the second unit to get