Delta Electronics MPL135 Specifications

SMT Power Inductor (MOLDING TYPE)
MPL135 Type
Features
RoHS compliant.
Low profile (5.0mm max. hegiht ) high current(lsat up to 65A) SMD type.
Magnetically shielded, suitable for hight density mounting.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Ideal for power source circuits, DC-DC converter,
DC-AC inverters inductor application.
In addition to the standard versions shown here,
customized inductors are available to meet your exact requirements.
Mechanical Dimension:
B
A
Electrical Characteristics:
PART NO.
MPL135-0R4
MPL135-R47
MPL135-R56
MPL135-R68
MPL135-R82
MPL135-1R0
MPL135-1R5
1. Lo is the initial inductance.
2. Isat is the DC current which cause the inductance drop approximately 20% of its nominal inductance without current.
3. Irms is the DC current which cause the surface temperature of the part increase approximately than 40
4. Operating temperature : -55
PWS trace size and thickness, airflow and other cooling component can affect the surface temperature of the part.
Please verify the temperature of the part in the end application.
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
E
D
F
o
At 25 : 100KHz, 0.25V C
1 DCR
L
o
(uH) (m ) TYP.
0.40 20% 0.72
0.47 20% 0.85
0.56 20% 1.30
0
.68 20% 1.20
0.82 20% 1.20
1 .00 20% 2.00
1 .50 20% 2.80
O to 125 O ( including self-temperature rise ). Circuit design, component placement,
C C
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: 886-3-3591968; FAX: 886-3-3591991
http://www.deltaww.com
RECOMMENDED PAD PA TTERNS
4.8/0.189
C
7.8/0.307
2
Isat
(Adc)
0.85 65
1.10 65
1.50 55
1.70 54
1.70 53
2.50 50
3.00 48
144
UNIT : mm/inch
A = 13.20 0.50 / 0.520 0.020
B = 12.90 / 0.508 Max.
D = 5.00 / 0.196 Max.
E = 0.01 / 0.0004 Min.
F = 2.54 0.30 / 0.10 0.012
3 Dimension "C"
Irms
mm / inch
(Adc)
0.5 / 0.02
45 4.7 / 0.185
42 4.7 / 0.185
38 4.7 / 0.185
36 4.7 / 0.185
35 4.7 / 0.185
30 4.2 / 0.165
27 4.2 / 0.165
O
C.