Device Support, Software Updates And Maintenance; Front Panel - XZENT ARGO X-F270 User Manual

DEVICE SUPPORT, SOFTWARE UPDATES AND
MAINTENANCE
Software updates and improvements are provided via USB updates which can be downloaded from
our website www.xzent.com Also customer care, FAQs and other helpful information can be found
there.
ATTENTION: this device has specifi c USB ports with special functions (USB-1 / top port at device
backside) and (USB-2 / bottom port at device backside). The extension cables are distinguishable thru
text-label to ensure proper identifi cation.
Software updates provided via XZENT MUST be installed on "USB-1" (USE FOR SW UPDATE). If the
installation has been done by 3rd party without proper marking/identifi cation of the extension wire – do
try the other port in case of update-failure.
USB1
Can be used for SW Updates
USB2
NOT for software updates
A
B
4
A B
1
C
3
2
4
Operation buttons:
1. VOL/POWER: Press and hold for standby mode (Screen OFF, Audio OFF).
If powered on, press to mute.
If powered off, press to power on.
Rotate clockwise to increase audio volume.
Rotate anti-clockwise to decrease volume.
2. Home Press to return to home screen.
Press in home screen to go to last source (if available).
Press and hold to open EQ.
3. NAV: Press to open navigation mode.
4. CAM: Press to show default camera, press again to close the camera view.
5. DAB Press to open DAB source. In DAB source press again to switch to FM.
6. ALT Press to execute assigned ALT shortpress function from device
settings (see chapter device settings).
Press and hold to execute assigned ALT longpress function from
device settings (see chapter device settings).
7. BT Press to open Bluetooth source.
A. RESET Press to perform a power reset.
B. MAP MicroSD slot for navigationssoftware (optional, not included in this set).
C. MIC internal microphone for handsfree functions.
D. IR IR lense for remote control.

FRONT PANEL

5 6 7
D
5