Table of Contents
Advertisement
Basics and mounting
Wiring 16x periphery modules
2.7 Wiring 16x periphery modules
Terminal block connectors
Data
Wiring procedure
1
2
24
3.
Attach the cables with the accordingly stripped cable screen and fix it by the shield
clamp with the shield bus.
CAUTION!
Do not connect hazardous voltages!
If this is not explicitly stated in the corresponding module description,
hazardous voltages are not allowed to be connected to the corresponding
terminal block!
The 16x periphery module has a removable terminal block for wiring. With the wiring of
the terminal block a "push-in" spring-clip technique is used. This allows a quick and easy
connection of your signal and supply lines. The clamping off takes place by means of a
screwdriver.
U
max
I
max
Cross section solid wire
Cross section with ferrule 0,14 ... 0,75mm
AWG
Stripping length
1
Release area
2
Connection hole for wire
30V DC
10A
0,25 ... 0,75mm
2
2
24 ... 16
10mm
VIPA System SLIO
HB300 | FM | 050-1BS00 | en | 20-40
Advertisement
Table of Contents
