Attaching Bucket - Koyker C185 Owner's Manual

ATTACHING BUCKET

1. Raise handles until they stop.
2. Then tip adapter down-ward to about 60 Deg.
3. Drive into bucket and aim the adapter toward the center of the back of the bucket and lower the adapter
below the lip on the bucket.
4. Once the bucket and the adapter meet lift adapter slowly and drive ahead very slow and tilt the adapter
straight up until bucket is about 2" off the ground surface.
5. Push the handles down until they snap and latch. Make sure periodically that the handles stay in the
latched position.
Page 9