Samsung Galaxy Z Flip 5G Notes On Usage page 31

• Do not cover the proximity/light sensor with your
finger or put a sticker on it. Doing so may hinder
it from detecting the ambient brightness and
functioning correctly.
• Do not put a sticker, etc., on the proximity/
light sensor. Doing so may cause the sensor to
malfunction and make the display always turned off
while receiving a call or during a call.
• Normally, keep the au IC card tray closed when using
the product. Otherwise, dust or water may enter the
product interior and may cause malfunctions.
• Do not put liquids, metals, or other foreign objects
into au IC card slot of the product. Doing so may
result in a malfunction.
• Do not subject to strong impact, such as dropping,
stomping and throwing. Doing so may result in a
malfunction.
• Do not put the product directly on sand at a beach,
etc. Sand or other small particles might get inside
the receiver, the mouthpiece/microphone (upper/
lower), the speaker, etc., causing the volume to
drop. If sand gets inside the product's main unit, it
might cause fault.
• When using the Wireless PowerShare function to
charge another device, do not stick metallic items
(such as stickers that contain metal) on the back
of the product or another device. Doing so may
result in a malfunction.
• When using the Wireless PowerShare function to
charge another device, if the temperature exceeds
a certain level, charging may stop or charging time
may long, but it is not abnormal. Please wait for
the temperature to decrease and charge another
device again.
• When using the Wireless PowerShare function
to charge another device, place the product and
another device on a flat, stable surface and charge
the product.
• Turn off the vibration function of the product when
using the Wireless PowerShare function to charge
another device. If the product vibrates, it may not
fully charge or fall.
• When using the Wireless PowerShare function to
charge another device, remove any commercially-
available cases, covers, plastic film, stickers, and
so on attached to the product or another device
before charging.
• When using the Wireless PowerShare function to
charge another device, check that the product and
another device are not wet.
Notes on Usage
29