Delphi Roady SA10035 User Manual page 21

Cable Routing
• Once you have mounted the antenna in the correct location, plan how to
route the cable from this location to the receiver, avoiding blocked passages
and any obstructions that could kink, crimp, twist, or chafe the cable. Figure 7
shows typical routing configurations. If the cable will come into contact with
a rough metal opening, use a rubber grommet to prevent damage.
• For antenna mounting locations at the front or middle of the roof, the cable
can be routed down along the door jamb and into the vehicle. In some vehi-
cles, the cable may be brought into the vehicle through the grommet in the
door jamb which carries the power window and power lock wires. If the
cable does not fit easily through the grommet, do not try to force it through.
Instead, route the cable under the weather seal near the bottom of the door.
Front Mounting Option
Figure 7. Route XM Antenna through windshield as shown.
21