Transport, Delivery And Storage - AGT PSG BCR03 Installation Manual, Operating Manual, Maintenance Manual, Spare Part List

Sample gas cooler
Table of Contents

Advertisement

Installation-, Operating-, Maintenance-Manual, Spare Part List
Transport

Transport, Delivery and Storage

After arrival of the delivery, the goods must inspect immediately in regard of completeness and damage.
In the case of damage or loss, the freight forwarder has to report all details to the insurer for the
assertion of compensation. Only if an appropriate documentation (i.e. photos) is available, damages can
be claimed.
If a damage appears which could cause further damages, the customer is committed to restrict the
damages to a minimum. For damage and consequential damage which could be prevented, there is no
liability.
WARNING! Possible damage! Even when packaged, keep the machine protected from
severity of the weather. Keep the dryer always in vertical position when transported or stored.
Turning it upside down some parts could be irreparably damaged. If not in use, the dryer can
be stored in its packaging in a dust free and protected site at a temperature of 2-65°C and a
non-condensing specific humidity of 20-80%. Should the stocking time exceed 6 months, please
contact the manufacturer.
NOTICE: Recycling! The packaging materials are recyclable. Dispose of material in compliance
with the rules and regulations in force in the destination country.
If damages are discovered after initial operation, the user is committed to undertake any action
to avoid consequential damage.
First actions could be to stop the load with sample gas and to switch off the main power
connection. Unplug the sample gas cooler.
Check for visible loss or damage, if no visible damage is found place the unit near to the installation point
and unpack the contents.
It is recommended to move the still packaged unit using suitable trolleys or hoists. We advise
against any manual transport. Notice weight and dimensions of the sample gas cooler (model
identification plate / technical data sheet).
Always keep the sample gas cooler in the upright vertical position. Damage to components could
result if unit is laid on its side or if placed upside down.
Handle with care. Heavy blows could cause irreparable damage.
Only upright vertical position!
AGT-PSG GmbH & Co.KG
Errors and printing mistakes excepted
Lying horizontal position vorbidden!
Translation - Manual BCR03 Rev. 7/2017
BCR03
Page 6

Advertisement

Table of Contents
loading

Table of Contents