Transportation, Storage And Disposal; Technical Data - Husqvarna LC 140P Operator's Manual

Transportation and storage
• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel tank before you put the product in
storage for a long period of time. Discard the fuel at
an applicable disposal location
• Safely attach the product during transportation to
prevent damage and accidents.

Technical data

Engine
Brand
Engine model name
Engine type
3
Displacement, cm
Speed, rpm
Nominal engine output, kW
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Engine lubrication type
Fuel tank capacity, litre
Oil tank capacity, litre
4
Engine oil
3
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
4
If SAE-30 oil is used at temperatures lower than +5 °C, there is a risk that it does not lubricate the engine
sufficiently. This can cause engine damage. Refer to
for low temperatures.
16

Transportation, storage and disposal

Technical data
3
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the product in a dry and frost free area.
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
• When the product is no longer in use, send it to a
Husqvarna dealer or discard it at a recycling
location.
LC 140P
Husqvarna
HS 123A
Single cylinder, 4-Stroke,
Forced Air Cooling, OHV
123
3000
1.95
Husqvarna HQT-7
0.7-0.8
Splash
0.9
0.5
Husqvarna SAE 30
To replace the engine oil on page 14 for the correct oil
LC 140SP
Husqvarna
HS 123A
Single cylinder, 4-Stroke,
Forced Air Cooling, OHV
123
3000
1.95
Husqvarna HQT-7
0.7-0.8
Splash
0.9
0.5
Husqvarna SAE 30
1562 - 001 - 21.10.2020