System Memory - Asus PRIME B560-PLUS Manual

1.4

System memory

This motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Module
(DIMM) sockets. The figure illustrates the location of the DDR4 DIMM sockets:
•
•
•
•
•
•
•
Recommended memory configurations
DIMM_A2*
1-10
E177887_PRIME_B560-PLUS_UM.indd 10 E177887_PRIME_B560-PLUS_UM.indd 10
DIMM_B1
DIMM_B2*
DIMM_A1
DIMM_A2*
You may install varying memory sizes in Channel A and Channel B. The system
maps the total size of the lower-sized channel for the dual-channel configuration. Any
excess memory from the higher-sized channel is then mapped for single-channel
operation.
A DDR4 memory module is notched differently from a DDR, DDR2, or DDR3 module.
DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.
11 Gen Intel processors support 2933/2800/2666/2400/2133 natively.
th ®
For 10 th Gen Intel ® processors, only Core™ i9/ i7 processors support
2933/2800/2666/2400/2133 natively, others will run at the maximum transfer rate of
DDR4 2666MHz.
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.
For system stability, use a more efficient memory cooling system to support a full
memory load.
Refer to www.asus.com for the latest Memory QVL (Qualified Vendors Lists)，and
memory frequency support depends on the CPU types.
DIMM_B2*
DIMM_A2*
Channel Sockets
Channel A DIMM_A1 & DIMM_A2*
Channel B DIMM_B1 & DIMM_B2*
DIMM_B1
DIMM_B2*
DIMM_A1
DIMM_A2*
Chapter 1: Product Introduction
2021/1/25 18:13:00 2021/1/25 18:13:00