CALI ALS500T-DBR-MI Installation Instructions Manual

END VIEW (With Mud-In Ceiling Trim)
X (Specified Length)
5.93"
3.64"
6.48"
7.39"
FEATURES
APPLICATIONS Indirect Lighting
LENS Clear
LENGTH
Built to Order (± 0.25" Tolerance)
CONSTRUCTION Aluminum Extrusion
FINISH White Powder Coated
DRIVER Remote
WEIGHT
4.80 lbs per foot
MOUNTING Aircraft Cable
Dry or Damp Location
UL1598, CSA C22.2#250.0
LISTING
UL8750, CSA250
UL2108, CSA C22.2 #9
Operating / Startup: -20° to 48°C (-4° to 120°F)
TEMPERATURE
RATINGS
Storage: -40° to 76°C (-40° to 170°F)
PRODUCT INFORMATION
• Indirect lighting
• 24 Volts DC for easy and safe installation
• Long life, energy efficient LEDs
• Available in 4 Watts up to 24 Watts Per Foot
• Can be ordered to specific lengths for when exact dimensions are known
Example: 10 x 10'6" (product is shipped in 8' max luminaires)
• Available for indoor (DRY) and (DAMP) rated installations
CALIFORNIA ACCENT LIGHTING, INC.
2820 E. Gretta Lane, Anaheim, CA 92806
ph. 800.921.CALI (2254) | fx. 714.535.7902 | info@calilighting.com | calilighting.com
© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.
READ ENTIRE GUIDE BEFORE STARTING INSTALLATION
IMPORTANT NOTICE:
CORRECT COLOR TEMPERATURE, VOLTAGE, AND WATTAGE BEFORE CUTTING OR
INSTALLING. CALI WILL NOT BE RESPONSIBLE IF INCORRECT LUMINAIRE IS INSTALLED.
ELECTRICAL
• ALS500T-DBR requires a remote driver. The driver may be mounted on top
of the luminaire or in a remote location.
• Drivers are 120V - 277V (UNV) Input Voltage and 24VDC Output Voltage
• To calculate driver size, determine Watts per Foot.
Example: 4W per Foot
• Determine Length in Feet.
3.93"
Example: 20'
• To calculate Load, Multiply Watts per Foot x Length in Feet
Example: 4W x 20'= 80W. The Load of the driver is 80 Watts.
• Maximum load for a Class 2 low voltage luminaire is 96 Watts
INSTALLATION RECOMMENDATIONS
• ALS500T-DBR can be mounted to concrete, wood, or metal using proper
mounting hardware.
• Ensure surface material can support the weight of the luminaire.
INSTALLATION TOOL REQUIRED
• Electric Hammer Drills (optional)
• 14.4 to 28 Volt Cordless Drills
• Phillips Bits - Sufficient Quantity
• Utility Knife
• Electrical Cords
• Marker
• Wire Strippers
ALS500T-DBR-MI
INSTALLATION INSTRUCTIONS
VERIFY CORRECT LUMINAIRE WAS RECEIVED WITH
• Long Nose Pliers
• Drill Bits - Concrete or Wood
• Electrical Three Ways
• Safety Glasses
• Measuring Tapes
• Chalk Line
Overview
1 / 29 / 2021 / Rev 2
Page 1 of 11