Dell 6100 Hardware Manual page 8

Microprocessor replacement

Hide thumbs Also See for 6100:

Table of Contents

Dell PowerEdge 6100/200 System Microprocessor Replacement

4. On the new microprocessor module, check or set the jumper settings

according to those shown in Figure 5 and Table 1.

CAUTIONS: All microprocessors must have the same processor

speed or the jumpers on all the microprocessor modules must be

jumpered to the speed of the lowest-speed microprocessor.

All microprocessors must have the same cache size.

All 200 MHz/1 MB microprocessors must be used on a microprocessor

module with Dell part number 95545.

All 200 MHz/1 MB microprocessors must be used in conjunction

with Dell BIOS Revision A05 or greater and Dell customer diagnos-

tics software 3.79D00 or greater. The BIOS and diagnostics software

are available through the Dell bulletin board service (BBS) and the

Dell Web site at www.dell.com.

If a Dell customer diagnostics diskette is included with your system,

use the diskette instead of the Dell Server Assistant CD.

For microprocessor modules with one microprocessor, populate the

PROCESSOR 1 socket first.

Figure 5. 200 MHz/1MB Microprocessor Module

Table of Contents

Poweredge 6100/200