Pureit CLASSIC NXT RO+MF/UV Series Instruction Manual page 7

FAQs
How does Pureit Classic Nxt RO+MF/UV* purify water?
Pureit Classic Nxt RO+MF/UV* has a 6-stage puri cation
process which ensures you to get water that is 'As Safe As
Boiled Water' and also removes excess Total Dissolved
Solids (TDS) to make your water tastier.
Stage 1st
Pre-Sediment Filter:
Removes ne and coarse particulate
impurities/dirt and improves the life of the carbon lter.
Stage 2nd:
Pre-RO Carbon Filter: Removes chlorine and organic
impurities like harmful pesticides. It also absorbs bad taste
odour causing organic compounds from water.
Stage 3rd:
Mini Filter:
Filters water further to ensure removal of ner
particulate impurities.
Stage 4th:
RO Membrane: Removes dissolved salts, hardness,
pesticides, uoride and heavy metals like arsenic, lead and
mercury. It also removes microbial contaminants like
bacteria, virus, protozoa and cysts.
Stage 5th:
UV Chamber or Micro Filtration Membrane(MF)*:
UV Chamber: Acts as an additional stage of puri cation to
further inactivate bacteria, virus and parasites to deliver
safe water.
MF Membrane: Micro Filtration Filter is added Post-RO,
which ensures that the water is puri ed not once but twice.
Stage 6th:
Post-RO Carbon Filter:
Last level of puri cation acts as a
polisher and enhances the taste of puri ed water.
What is the storage capacity of Pureit Classic Nxt
RO+MF/UV*?
Pureit has Storage Tank capacity of upto 7 litres. The
storage tank is fully automatic and well shielded and as
and when you take water out of the tank, the puri cation
process starts automatically again and re lls the storage
tank.
How much time does it take to purify water in Pureit
Classic Nxt RO+MF/UV*?
Pureit can purify water up to 10-12 litres per hour
depending on the device you have purchased. However,
the time taken to purify depends on the life of the lters,
the input water pressure, TDS and other impurities present
in the water.
Does Pureit Classic Nxt RO+MF/UV* remove arsenic,
uoride and nitrates?
Like other ions, the RO technology can also remove arsenic,
uoride and nitrates.
How will I get new consumables/membranes replaced?
You need to call the Pureit helpline and order the
consumables. The customer care specialist will visit your
place and replace the consumable/Germkill Kit at a
nominal cost.
What are all the consumables which are to be replaced?
You need to replace / clean the sediment lter basis water
quality and GKK approximately every 1 year from date of
installation.
Can I drink the rst puri cation cycle of water from the
puri er?
No, recommendation is to throw the rst cycle of water
that is lled in the storage tank when the new Pureit
puri er is installed and also whenever the Germkill Kit are
replaced.
Can I open and service my puri er?
It is not recommended to open and service puri er by an
individual. Call our Pureit helpline if you face any issue
which requires servicing and opening of the puri er.
Can I use reject water?
It is not recommended to use the reject water for any kind
of human/pets consumption (drinking or cooking). It may
be used for gardening or cleaning oors.
What should I do if any part of puri er is broken?
Please call the Pureit helpline. Our technicians will visit
your house and guide you on the repairs required. There
will be a nominal visiting charge and you would need to
buy the parts required.
What should I do if there is leakage from the puri er?
First switch o the ball valve if you nd any leakage from
the puri er and turn o the power switch. Check for any
visual improper tment and then call our Pureit helpline
number and register a service request.
How long the stored water in Pureit Classic Nxt
RO+MF/UV* can be used for drinking?
You can use stored water for 2 days. If it is not used for
more than 2 days we advise you to discard that water, re ll
and then consume.
Reach Pureit @
1860-210-1000
www.pureitwater.com
6