Laserworld RTI-Nano Tripan Manual page 10

Manual: RTI Nano AT Series
9.2 Color Settings: 9.2 Color Settings:
+ / -:
Use these buttons to
change the color inten-
sity
9.3 Scanner Settings: 9.3 Scanner Settings:
Y Size vertical:
Use these buttons to
change the vertical size of
the output
Y Shift up/down:
Use these buttons to
change the vertical shift
of the output
page 10 / 25
Colors:
Please note that
only implemented laser
sources can be changed in
their itensity. If there is e.g.
no yellow laser source in-
stalled in your device you
can't change the itensity
of the yellow color.
The intensity change
only applies per single
laser source and does
not change mixed colors.
Please use your software
to change mixed color in-
tensities.
X Size horizontal:
Use these buttons to
change the horizontal
size of the output
X Shift left/right:
Use these buttons to
change the horizontal
shift of the output